Model Number HQP6-2
Power Processor (P): 24–36 V- 250 mA
Links (L1 / L2): 24–36 V- 2 A per link
Typical Power Consumption
5 W; 8 Power Draw Units (PDUs)
Test conditions: Two Ethernet links connected, both device links in use
Regulatory Approvals UL, cUL, CE, NOM
Environment Indoor use only. 32 °F to 104 °F (0 °C to 40 °C), 0% to 90% humidity, non-condensing
Heat Generated 17 BTU/hr — typical (24 BTU/hr with 2 links at 2 A each output)
Cooling Method Passive Cooling
Power Failure Memory System data stored in non-volatile memory. Timeclock retention for 10 years
Internal Timeclock ±1 minute per year
Miswire Protection All terminal block inputs are over-voltage and miswire protected against wire reversals and shorts.
Two pair — one pair 18 AWG (0.75 mm2 ), one pair 18 to 22 AWG (0.34 to 0.75 mm2 ) twisted shielded — IEC PELV / NEC® Class 2 cable
Wire Type 18 AWG (0.75 mm2 )
Communications Ethernet, RS485 (QS, RF, Power Panel)
Link Capacities HomeWorks Power Panels 16 interfaces/256 zones
HomeWorks QS Wired Device Link 99 devices/512 zones
HomeWorks RF Link 99 devices/100 zones
HomeWorks Wired Dimmers 4 interfaces/192 zones
ESD Protection Meets or exceeds the IEC 61000-4-2 standard
Surge Protection Meets or exceeds ANSI/IEEE C62.41 standard
Mounting Mounts in HQ-LV21, L-LV14, L-LV21, or PNL-8 enclosure
Dimensions With terminal blocks (as shown): 4.27 in (108 mm) x 6.0 in (152 mm)
Without terminal blocks: 4.27 in (108 mm) x 5.26 in (134 mm)
Connections Two 5-pin removable terminal blocks* for Links 1 and 2.
One 5-pin removable terminal block* for Power Input.
Two RJ45 standard Ethernet connections.
*Each terminal will accept up to two 18 AWG (0.75 mm2) wires.