Interface entrées / sorties contacts secs – QSE-IO

Specifications
Regulatory Approvals
• UL® Listed
• cUL® Listed
• CE compliant
Power
• SELV / PELV / NEC® Class 2
• Operating voltage: 24–36 V- 100 mA
QS Link Limits
• The QS wired communications link is limited to 100 devices and 100 zones. Each QSE-IO control interface counts as 1 device and 5 zones.
• Each QSE-IO control interface consumes 3 Power Draw Units (PDU) on the QS link. Refer to the QS Link Power Draw Units Specification Submittal
(P/N 369405) at www.lutron.com for more
information.
• The maximum wiring length for the QS link is 2000 ft (610 m).
Environment
• 32 °F to 104 °F (0 °C to 40 °C).
• Relative humidity less than 90% non-condensing.
• Indoor use only.
• Unit generates heat, maximum 8 BTU / hr. Functionality and Operating Modes
• Using the inputs, contact closures in otherequipment can operate control units to:
– Select scenes
– Adjust scenes to reflect status of movable walls
– Toggle any combination of zones in the system
between Off and a configurable preset value
– Turn lights on or off and / or move shades based
on room occupancy
– Perform special functions such as sequencing,
panic, control lockout, or timeclock disable
• Using the outputs, scene and / or zone changes in control units can:
– Trigger outputs to control other equipment
– Provide status feedback to other equipment